Home > Hard Drive > Installing Winxp On A Slave Drive

Installing Winxp On A Slave Drive


Tip: If you transfer Windows XP from one drive to another, you may have to reauthorize Windows. Am I missing something, or should I use a third party tool? Anyhow, I will get the pleasure of putting the old one in needy hands, kids I have been working with a long time. Custom Search Join the PC homebuilding revolution! my review here

grandpaw Flag Permalink This was helpful (0) Collapse - Re: Thanks, datalookup by Lawrence / August 29, 2004 10:36 PM PDT In reply to: Thanks, datalookup I don't know how old Fortunately, mammoth-capacity upgrades are inexpensive (many 250GB drives cost less than $100), and you can install one in less than 30 minutes, not including formatting time. Do you want to create a dual boot system, or are you wanting to make your slave drive your primary? Warnings are replete that all information contained will be lost/erased...

What Is A Slave Hard Drive

Keep in mind again that there are only folders and mp3's onm it, no operating system on this drive. Two Inexplicable Jokes in the Film "Airplane!"—Surely Someone Must Know What They Mean Keeping it simple for new players Can political debates really work? Logged dahlarbearSpecialistThanked: 101 Re: Can I REPAIR Windows XP on a Slave Drive? « Reply #9 on: March 05, 2009, 01:55:46 PM » You can check the "integrity" of the file User Name Remember Me?

Booting a PC with 2 hard disks, each with it's own OS and logical DOS partitions, without one configured properly as a slave, can irrepairably damage a PC, so I'm told... But if you're replacing your boot drive and you have an empty bay, follow our steps for adding a second drive. Are you going to leave the old drive in permanently, or do you just want to get the data off it? Install Old Hard Drive In New Computer You?

Flag Permalink This was helpful (0) Collapse - Re: Install old hard drive as slave drive? It all depends on how important the information is that's on the drive. As I did mention in one of my posts, I have foregone the idea of installing the old drive on my new computer for a number of reasons, including the fact https://social.technet.microsoft.com/Forums/office/en-US/099d9e7c-1a00-4710-be94-c3a4e09d49b6/installing-windows-xp-to-a-slave-drive-to-become-the-boot-drive-in-a-different-system?forum=itproxpsp Archives November 2016 October 2016 September 2016 Categories All RSS Feed Create a free website Powered by Blog ✕ Articles & News Forum Graphics & Displays CPU Components Motherboards Games

sturmSep 1, 2009, 12:01 AM Quote: I am using the secondary port on the IDE controller, which is located on the motherboard, to operate CD-ROM and CD-RW drives. Slave Hard Drive Definition If it finds problems, it can take a very long time to recover (appears hung... If it is formated you should be able to boot from the Xp install CD and go from there. 03-01-2005, 08:43 AM #3 horrgakx Registered Member Join Date: BTW, unless both machines are identical, you really want to be installing XP with the drive attached to HIS machine, not yours. __________________ If TSF has helped you, Tell us about

How To Slave A Hard Drive Windows 7

If that doesn't work I would use GetDataBack. I have about 80GB. What Is A Slave Hard Drive Balao / September 2, 2004 10:51 PM PDT In reply to: Install old hard drive as slave drive? How To Slave A Laptop Hard Drive Select the "Check Now..." button, a windows will appear with two options (or neither option):Neither option.

If you tried a DVD drive, did you try a CD drive? this page I would purchase a USB memory device now If your 98 PC has USB. Right click on the new drive and choose "Initialize."Right click the drive and select "New Partition," and follow the steps in the partition wizard that appears to prepare the hard drive This is one of the "standard" maintenance tasks that you should periodically perform with a Windows operating system.You may either use the command line tool "chkdisk" or the GUI program accessed How To Slave A Hard Drive To Recover Data

I also think a USB data cable can be used but don't remember the company that sold the software. This is usually done by creating a boot disk (either floppy or using a bootable CD image) with the diagnostics on it and booting to that to run them. SATA power connectors are usually black and look like a thin slit that is about 1 inch wide. http://relite.org/hard-drive/access-denied-on-slave-drive-folder.php Flag Permalink This was helpful (0) Collapse - Thanks, datalookup by grandpaw7 / August 29, 2004 1:06 AM PDT In reply to: Re: Install old hard drive as slave drive?

Reply With Quote 12-19-2006,08:13 AM #19 Erik View Profile View Forum Posts View Blog Entries View Articles Grand Master Geek Join Date Nov 2001 Location NY Posts 1,509 Originally Posted by How To Slave A Sata Hard Drive Get the answer Best answer PaperdocAug 27, 2009, 11:46 PM Sturm is right. If it is too slow, it will negate one of the big reasons for buying a new computer - faster computing.

If you're installing a SATA drive as secondary storage, follow the data cable from your current drive (assuming it's SATA, too) to the other end.

If the primary parts of the motherboard such as the chipset are not substantially the same, XP usually will not boot up because of the hardware difference. Isn't it important that both HDD's be connected when the partitioning is being done?... I'm also thinking that before I shut down the computer when it worked yesterday, I had messages about some missing DLL files; I think 2 separate DLL files. Slave Hdd Reattach your original Win7 hard drive as master with your old hard drive as slave and reboot.

Results 1 to 20 of 20 Thread: Installing XP on a Slave Drive? Disconnect your current master drive and make the slave drive master and install Windows. EACH port can accept two drives with one set as the master and one as the slave. useful reference After the system is up and running again, you can copy your files back.

Formatting could take an hour or more, depending on drive capacity. it is only detected through device manager, not computer management so is there another way to back it up? Now you have to do a serious defrag on the drive to get everything in order AND after you install the software on your new C:\ drive, you have to go Join the community here.

JUST ENSURE YOU SET YOUR JUMPER TO SLAVE SETTINGS PRIOR TO INSTALLATION. The problem is using an existing Windows XP machine to install a diff version of XP onto a slave drive. It'll all be over in, well, I haven't flgured out how many years yet; rather I'll leave that calcuation to an Expert in such things. Neither options may be used when you think the disk drive logic itself is "hosed" and you don't want to risk writing data to the wrong sector.

Logged http://boincstats.com/en/stats/134/team/detail/3073/chartshttp://boincstats.com/en/stats/-1/team/detail/181349403/charts patio ModeratorSage Maud' DibThanked: 1590 Experience: Beginner OS: Windows 7 Re: Can I REPAIR Windows XP on a Slave Drive? « Reply #2 on: March 05, 2009, 10:19:55 AM BUT just be aware that the First partition of the old disk (C drive of the old disk) will be shown as the D drive in the new computer. This can be beneficial to other community members reading the thread. ” Saturday, December 15, 2012 11:45 AM Reply | Quote 0 Sign in to vote The problem with that is