Home > Black Screen > New Presario With NO VIDEO OUTPUT - Processor Light Solid?

New Presario With NO VIDEO OUTPUT - Processor Light Solid?


If you can hear the computer's fan spin and see lights on the computer, the problem is probably caused by the video cable connection or the display. Thank you for helping us maintain CNET's great community. You can also hear from the monitor speaker a sound that is similar to that when you plug in any usb device indicating that is has connected. Turn on the display and wait about ten seconds while the computer starts.

asked 5 years ago viewed 16881 times active 10 months ago Blog Stack Overflow Podcast #98 - Scott Hanselman Is Better Than Us at Everything Benefits for Developers from San Francisco Please help .... Might be labeled "Reset SW". I was so frustrated with this occurrence so I watched the motherboard and the "innards" while playing with the power switch, power cable, and the 125/220 volt switch on the power http://support.hp.com/us-en/document/bph04760

My Hp Computer Screen Is Black When I Turn It On

Matt Jeppsen FreshDV.com ted January 15, 2008 at 8:32 am Reply I've got an interesting variation on this problem. Here on, My PC never POST since then. (Having similar problems with many of the threads in here) Symptoms when turn pc on: - All fans running - LEDs On - The problem started when I started using my big screen for a monitor. The last couple of day the orange light has been blinking but it usually starts up after a while.

It may have been knocked loose when your system was being moved around or when it was kicked. Very helpful Somewhat helpful Not helpful End of contentUnited StatesHP WorldwideStart of Country / Region Selector contentSelect Your Country/Region and LanguageClick or use the tab key to select your countryArgentinaAustraliaBelgiqueBoliviaBrasilCanadaCanada-françaisČeská republikaChileColombiaDeutschlandEcuadorEspañaFranceIndiaIrelandItaliaMagyarországMéxicoNew I sent it back to HP again, they did something to it and sent it back to me. Hp Pavilion Desktop Black Screen On Startup We are not giving the parts away.

Liz April 21, 2011 at 11:19 pm Reply Worked like a charm! thanks Jeremy Brock September 26, 2008 at 1:15 am Reply I see this frequently, It’s almost always caused by bad capacitors. If the monitor does not work after replacing the cables, replace or service the monitor. http://ccm.net/forum/affich-27227-computer-powers-on-but-does-not-boot?page=2 Are your CD ROM drive working (Press the eject button).

Figure : DisplayPort connector Figure : DisplayPort receiving connector Figure : DVI connector Figure : Examples of DVI receiving connector Common connections used currently are DisplayPort and DVI. Monitor Is Black But Has Power If you did not feel the heat then I suspect processor failure. Press the key about once every second for 5 seconds after turning the computer on. So far all we've gotten to is "press check if the power button is not broken.

Hp All In One Blank Screen

Glad I found this site and will put it in my bookmarks for future reference! http://superuser.com/questions/277589/compaq-computer-has-power-but-its-not-booting-up When i turn the computer on the fans run fine but, it does not beep or boot and monitor say no signal. My Hp Computer Screen Is Black When I Turn It On The other posters suggestions can take over from here. Computer Monitor No Signal If you continue to have problems, please join our free forums for additional help.

Click arrow next to paperclip. Otherwise if the discrete video card is the only video adapter in the system, you must leave it in place. thanks.. Jeannie January 31, 2008 at 7:49 pm Reply Hi everyone……I have the blinking light too………and all this has been very helpful. The only spare one i had, a really old 480watt didn't have the aquedate connections to power the CPU. Hp Pavilion 23 All In One Black Screen

I replaced it with a brand new bigggg-fan 420W power supply (40€) and now it works like a charm and more silently. Ams October 2, 2008 at 10:40 am Reply Before you begin Do the following things to prepare for troubleshooting: Turn off the computer. You can't measure "good" or "fast" 03-18-2012, 03:44 PM #14 wkw427 Gaming | TechHardware Tech Master Hatt Inspecteur Join Date: Nov 2008 Location: The Internet Posts: 2,433 Now I must wait to see if my heat transfer compound spreading skills are good enough to stop melt down. Mike C January 21, 2008 at 10:44 pm Reply I

I did a battery run-down test (ie, LCD and HDD on, but not doing anything). No Display On Monitor But Cpu Running The power light flashed quickly and then the computer booted. I believe the cold condensation/temperature or something killed my original power supply.

It just continues with the YYYYG flashy message.

I thought I had beaten it when I replaced the 3V battery, untill I pushed the power button in, then the blinking started again. The unit is a compaq presario SR5010NX desktop very slightly used as I have laptops and tablets I use more often. I got the repeating post beeps so powered down and grabbed a pencil and one by one cleaned the contacts on the RAM, replaced one stick and powered on. Hp Desktop Black Screen Of Death Then the screen either goes black and stay black or occasionally has a little flashing bar in top left hand corner.

computer-behavior compaq-desktop-computer share|improve this question edited Feb 27 '16 at 21:03 fixer1234 12.4k123151 asked May 1 '11 at 2:42 phpnerd211 110116 Does the display ever show anything? –jcrawfordor May Please help?????? Click here to Register a free account now! Before I proceed, I want some answers for my problem:( My modem got pretty much fried up last week...and since I had some time today, I finally managed to get a

The PSU that was in the pc was 300 watt. After Dell screwed up and put clients name and DHL corrected it, replaced parts. Do not remove the video port cover If your computer came with a graphics card, HP may have installed a plastic cover over the video port attached to the motherboard. The problem is i get nothing from turning it on but power.

I used my ‘puter to check my local movie times, went to see the movie, and came back with the blinking light. Thank you! Used just a standard ATX power supply to test, but this would not fit in the case without some cutting of the case. The computer started working.

Once you do that, go to Safe Mode by tapping F8 when you first boot.